 |
|
|
 | Blanket Systems for Liquids |
|
|
ALLPLAS FLOATING BALLS
|
The well- established blanket system for open tanks
The ALLPLAS system relies on the use of hollow plastic spheres to form a floating blanket cover on the surface of liquids. There are no costs for installation as they automaticllay arrange themselves into a closely packed configuration. All liquids are being covered in that way by nearly 100 % without having the disadvantage of a stabil covering. This system eliminates the danger of building explosives by gas concentrations between liquid surface and cover. The blanket permits free access to the tank contents while the complicated handling of solid-installed covers is most likely only possible by using technical support, causes time and overheads as well as costs for personnel. The blanket also allows the diving and removal of all objects at any time.
|
|
|
The main advantages of the ALLPLAS System
|
 |
Heat losses will be avoided through one layer of ALLPLAS balls up to approximately 69 % (a double layer reduces loss to 75 % and a triple layer nearly 100 %).
|
|
|
Energy costs are being cut extremely, the consumption of expensive chemicals drops sharply.
|
|
|
Evaporation losses are being reduced up to 88 %.
|
|
|
With respect to cooling processes savings can be achieved through the isolating influence. The cooling and freezing of liquids is retarding.
|
|
|
Moisture absorption from the air is reduced.
|
|
|
Environmental relieve, improvement of working conditions and safetyness.
|
|
|
Reduction of smells (for example reduction of hydrogen sulphide, H2S,concentrations under defined conditions up to 98,2 %)
|
|
|
Reduced oxygen absorption and pollution of liquids.
|
|
|
Avoiding splashing of hot and corrosive liquids.
|
|
|
Reduced corrosion problems by construction parts being near-by, as aggressive fumes develop less strongly.
|
|
|
A 40page Allplas-brochure as well as many technical reprints about further application possibilities are available on request.
|
|
|
|
Material: polypropylene, polyethylene
Sizes: Standard ball diameter 7.5, 20, 38, 45, 70 mm, special sizes on request
Packing: in cartons or polybags, contents depending on ball diameter
|
|
|
|
Ritter Chemie - Stendorfer Str. 3 - 27721 Ritterhude - Tel. (04292) 81 63 50 Fax (04292) 81 63 59
|
|
|
|
|
|
|
|
|
|
Blanket System for Liquids
|
|
printable version
|
